Lancisti Community http://www.lancisti.net/forum/ An online community for Lancia owners and enthusiasts. en Fri, 03 Sep 2010 23:36:33 GMT vBulletin 60 http://www.lancisti.net/forum/images/misc/rss.png Lancisti Community http://www.lancisti.net/forum/ For Sale: Zagato Soft-Tops, Top Boots and Carpeting http://www.lancisti.net/forum/showthread.php?4470-Zagato-Soft-Tops-Top-Boots-and-Carpeting&goto=newpost Fri, 03 Sep 2010 18:59:21 GMT As some of you may know, I had a very substantial Lancia parts business back in the 1980's and 1990's. I closed it in early 2006 but to this day I was still receiving emails from former customers and other folks referred to me if I still had parts available.

I hooked up with some of my "old" suppliers and decided to start offering a limited amount of items which I will slowly add to over time. I am starting with Zagato Soft-Tops, Top Boots and carpeting. Please visit:

www.ZagatoTop.com

for details.

Ed
www.ItalianCarManuals.com ]]> Lancisti Classifieds Ed P http://www.lancisti.net/forum/showthread.php?4470-Zagato-Soft-Tops-Top-Boots-and-Carpeting 30 Aug 2010 - Mallory Park - race video http://www.lancisti.net/forum/showthread.php?4469-30-Aug-2010-Mallory-Park-race-video&goto=newpost Fri, 03 Sep 2010 10:08:10 GMT Footage from Ginetta G4 racer : http://www.youtube.com/watch?v=MH8LxIfNOO4 Little blue lancia appears on outside of Gerrards corner at minute... Footage from Ginetta G4 racer :

http://www.youtube.com/watch?v=MH8LxIfNOO4

Little blue lancia appears on outside of Gerrards corner at minute 2:05 till pull off into pits for driver change at 3:00

Enjoy! ]]> Fulvia Forum ecoangel http://www.lancisti.net/forum/showthread.php?4469-30-Aug-2010-Mallory-Park-race-video Wanted : Fulvia Parts http://www.lancisti.net/forum/showthread.php?4468-Wanted-Fulvia-Parts&goto=newpost Thu, 02 Sep 2010 18:47:23 GMT Just got myself an S3 Fulvia Rally Coupe. Its the usual story, some rot but basically not a bad investment. I am looking for the following... Just got myself an S3 Fulvia Rally Coupe.

Its the usual story, some rot but basically not a bad investment.

I am looking for the following parts.
  • Both Wings
  • Front Windscreen
  • Driver's door lock and matching key
  • Driver's window winder mechanism's spring
  • Bootlid
  • Bootlid bracket that connects it to the hinge
  • Bonnet, or repair panel for leading edge of frame.
Obviously the condition is important, they need to be good.

Am sure you are all chuckling at that, but I gotta ask.

I have spares too if you re interested :-
  • Both front seat cushions, superb condition.
  • Both parts of rear bench, good condition.
  • Both Front Seat frames, good condition.
  • Fuel Tank, tatty but no holes.
  • 2 original steel wheels, in need of TLC.
Regards, Karl (Staffordshire 07973 682402). ]]> Fulvia Forum Highridge http://www.lancisti.net/forum/showthread.php?4468-Wanted-Fulvia-Parts Gas Tank Questions http://www.lancisti.net/forum/showthread.php?4467-Gas-Tank-Questions&goto=newpost Thu, 02 Sep 2010 12:13:05 GMT Hi. I am in the process of taking the tank from my 1982 Zagato to a place that will clean it and coat the inside. I have seen som rumblings about a... Hi. I am in the process of taking the tank from my 1982 Zagato to a place that will clean it and coat the inside. I have seen som rumblings about a screen/sock that needs to be removed from the tank, but I have not been able to locate the posting the describes how to do it - can someone point me toward the discussion or tell me where it is located?

Also, I am planning to replace all of the fuel lines going into the tank. I bought 12 feet of fuel line and when I got it home I realized it is standard / not Fuel Injected line. Can I use this line for the emission hoses into the tank? if so, can someone look at the picture I attached and tell me which letters I can use the regular fuel line on?

http://s321.photobucket.com/albums/n...t=GasTank2.jpg

Thanks much!
Rob ]]> Beta Forum budzinsk http://www.lancisti.net/forum/showthread.php?4467-Gas-Tank-Questions Solex tuning http://www.lancisti.net/forum/showthread.php?4466-Solex-tuning&goto=newpost Thu, 02 Sep 2010 12:04:41 GMT As compared to Webers, which I am pretty handy at, the 35 PHH's don't have much definitive procedues on one or two pages that I have located to set these up. Can anyone point the way? i haven't touched them since the car arrived and the moment has arrived.

I've got a good Redline synch tool and I can count turns. I've got them pretty much synched but a little too low idle. (700)

What settings do you start with on your speed screw and mix screws?

My Weber experience is to set the idle screw at an arbitrary point like 1/2 turn in then 1 turn out on mix screws so the engine idles on it's own. Then adjust mixes one at a time for smoothness and finally resetting the speed and rematching with the synch gauge bringing the higher reading down to the low one.

Is this about how it is done with these? or am I assuming too much?

BTW a good ell shaped radiator hose makes a good extention for the synch gauge
and saves removing the filter can from the inlets of the carbs. ]]> Fulvia Forum Rick http://www.lancisti.net/forum/showthread.php?4466-Solex-tuning Destination UK http://www.lancisti.net/forum/showthread.php?4465-Destination-UK&goto=newpost Wed, 01 Sep 2010 13:51:26 GMT I'm visiting my friend with the Italia Sep 16-22. Anyone like to share a pint?
He lives in Hertfordshire, near Chapmore End and Bengeo, not far from the Tuesday meeting place pub some of you indulge in.

I'll try to get to Norwich to see Omicron. If there is anything anyone in the states wants brought back to save the freight, let me know. Seems like freight on a set of points is next to $50. ]]> Fulvia Forum Rick http://www.lancisti.net/forum/showthread.php?4465-Destination-UK Subframe mounting box dimensions http://www.lancisti.net/forum/showthread.php?4464-Subframe-mounting-box-dimensions&goto=newpost Tue, 31 Aug 2010 23:41:20 GMT Can anyone help with the dimensions of the Fulvia subframe mounting box, a friend needs to get a pair made, and while he has a drawing of the box it... Can anyone help with the dimensions of the Fulvia subframe mounting box, a friend needs to get a pair made, and while he has a drawing of the box it doesn't show any measurements.

Brian ]]> Fulvia Forum fay66 http://www.lancisti.net/forum/showthread.php?4464-Subframe-mounting-box-dimensions Wanted: Scorpion Front Trunk Release http://www.lancisti.net/forum/showthread.php?4463-Scorpion-Front-Trunk-Release&goto=newpost Tue, 31 Aug 2010 20:26:56 GMT I need a new front trunk hood release. This is the part that has the key lock, lever and surround that is down by your foot. I don't care about the key, I just need a new lever and surround.

Send me a PM with a price...

Thanks,

Ed ]]> Lancisti Classifieds ecohen2 http://www.lancisti.net/forum/showthread.php?4463-Scorpion-Front-Trunk-Release Flavia 1800 water circuit http://www.lancisti.net/forum/showthread.php?4462-Flavia-1800-water-circuit&goto=newpost Tue, 31 Aug 2010 19:36:32 GMT Does anyone have any images or diagrams of the water circuit for a Flavia 1800, ideally an 1800 twin carb model. My Sport had a bit of a Heath... Does anyone have any images or diagrams of the water circuit for a Flavia 1800, ideally an 1800 twin carb model. My Sport had a bit of a Heath Robinson setup which may or may not have lead to the failure of the engine in a previous owners hands. My rebuilt built 'pure' 1800 originally had a single carb so the heads have no take offs for heater or temp sensor.

My car had a hybrid engine with 2000cc heads on an 1800 block, there was a take off on the RH head for the heater feed (I believe it is feed, it heads off to the control valve) and a sensor boss on the LH head. There was no thermostat housing instead there was a T piece made from copper plumbing fittings! linking the head outlets through the manifolds back to the radiator. The other oddity is that the water pump has an outlet on the RHS (viewed from the drivers seat) which has been blanked off, I think that this can create an air pocket reducing pump efficiency.

So overall the system I had before on the hybrid;

Outlet from radiator into pump.
Blanked off port on pump
Exit from pump down to cross over pipe into RH & LH heads
Exit heads through manifolds into T
RH head feeds heater direct from casting port
Heater returns to base of cooler
Bypass hose from cross over pipe into base of cooler.
Sensor in LH head.

I am making up a new T with a take off for the heater and a boss for the sensor so I ca fire up in cofidence but I would dearly like to know what the blanked off port is for. I am thinkig of fitting a bleed point to it so I can vent any air. ]]> Flavia Forum philm http://www.lancisti.net/forum/showthread.php?4462-Flavia-1800-water-circuit Paint code http://www.lancisti.net/forum/showthread.php?4461-Paint-code&goto=newpost Tue, 31 Aug 2010 18:23:11 GMT Does anyone have the paint code for my car, S2 Sport Dark Blue. I have no idea what it is called. I have to get the bonnet resprayed as the paint is... Does anyone have the paint code for my car, S2 Sport Dark Blue. I have no idea what it is called. I have to get the bonnet resprayed as the paint is lifting in a few areas (new 18 months ago, quality work eh) and no a big bird sh.... on it, cooked in the sun and has eaten into the paint. Much was made (by vendor and Magazine write-up) of the paint code being in the glovebox and used for the respray but it didn't come with the car.

Thanks PeteAttachment 3056
Attached Images
]]> Fulvia Forum Pete-Bolse http://www.lancisti.net/forum/showthread.php?4461-Paint-code Fanalone on ebay http://www.lancisti.net/forum/showthread.php?4460-Fanalone-on-ebay&goto=newpost Tue, 31 Aug 2010 11:32:20 GMT Now you dont see one of these on ebay too often.

40k seems "cheap", interesting to see what the reserve is. Has non-Fanalone seats.

http://cgi.ebay.co.uk/LANCIA-FULVIA-...Automobiles_UK ]]> Fulvia Forum bruciebonuz http://www.lancisti.net/forum/showthread.php?4460-Fanalone-on-ebay o2 sensor? #2 http://www.lancisti.net/forum/showthread.php?4459-o2-sensor-2&goto=newpost Mon, 30 Aug 2010 19:08:32 GMT would a bad or diconnected sensor cause the exhaust man. to get red hot? or is it something else? would a bad or diconnected sensor cause the exhaust man. to get red hot?
or is it something else? ]]> Beta Forum m82z http://www.lancisti.net/forum/showthread.php?4459-o2-sensor-2 Flavia 2000 HF runs rough. http://www.lancisti.net/forum/showthread.php?4458-Flavia-2000-HF-runs-rough.&goto=newpost Mon, 30 Aug 2010 17:42:45 GMT Ive just changed the waterpump and replaced the air filter, fan belt & servo belt on my 2000HF. However she seem to have started running a bit rough. It feels like there might be something to do with the Ignition as the engine rattles a lot more than before.
Has anyone got any sugestions?
Bjorn
Norway ]]> Flavia Forum Flavisimo http://www.lancisti.net/forum/showthread.php?4458-Flavia-2000-HF-runs-rough. Voltage Regulator http://www.lancisti.net/forum/showthread.php?4457-Voltage-Regulator&goto=newpost Mon, 30 Aug 2010 17:41:51 GMT My Red charge light came on bright so I searched and found possible culprits from the collective wisdom here. My voltage regulator and relays are... My Red charge light came on bright so I searched and found possible culprits from the collective wisdom here.
My voltage regulator and relays are all mounted (to me) upside down, wiring on top. Is this normal? I haven't been able to find a picture of another car to compare.
I removed the regulator and opened it up and found a wonderful soup off water oil and rust. Carefully cleaned it up and no more red light.

Pete ]]> Fulvia Forum Pete-Bolse http://www.lancisti.net/forum/showthread.php?4457-Voltage-Regulator Removing the scorpion dash panel http://www.lancisti.net/forum/showthread.php?4456-Removing-the-scorpion-dash-panel&goto=newpost Mon, 30 Aug 2010 06:57:07 GMT Hi there again, sorry I have not been posting for a while. Could anyone advise me how to remove the complete dash panel with trhe vents from my... Hi there again, sorry I have not been posting for a while. Could anyone advise me how to remove the complete dash panel with trhe vents from my scorpion? I need to get access to the heater assembly to remove it from the car as well. My Alfa V6 engine is in there already and most of the connections are done. I may need help later to connect the engine wiring to the car. Thank you again Roger ]]> Scorpion/Montecarlo Forum Roger LA http://www.lancisti.net/forum/showthread.php?4456-Removing-the-scorpion-dash-panel