wheelarches Lancia Beta Coupé Gr.3.

[kurtys]

Hi I have a Lancia Beta Coupe and I have several sets of wheelarches Lancia Beta Coupé Gr.3.
Cost me a lot to find and perhaps someone on this board is interested in acquiring any.
Its price is 230 € including shipping to anywhere in Europe-USA.
Front wheelarches FIA Ref: 82317306
FIA rear wheelarches Ref: 82317304
I put some pictures to see how it is, if anyone is interested to contact me boryser@hotmail.com
Greetings
429242944295
42934296

[kurtys]

Hello, after receiving some messages from people on the forum interested in the wheel arches and see that the price is high, I searched for ways to get cheaper, and instead of sending them by the transportation agency can be sent by parcel post .
The price of the wheel arches is 180 €, shipping is 35 € for Europe and the USA
If you have other ways of picking the cheapest product would be good to know.
Thanks

[Dave2e]

Are you able to safely send them to Australia?

Please advise the shipping cost and details as well as you best price to me via my email address: d2e.commstream@gmail.com

[kurtys]

Hi Dave2e, You have already been answered by e-mail.
Greetings

[kurtys]

Hi I have a wheelarches place with screw fasteners failing to put his cane or rubber trim at the top that rests on the bodywork. I put some pictures of the process:
4407 (http://i55.tinypic.com/11llo43.jpg)These are the rivets and screw thread 4 / 10. The screws will not be the final, I have to find a black with broad flat head, not having to put washer.
4408 (http://i52.tinypic.com/2v1ro6w.jpg)
So are the rivets in the wheel arch
4409 (http://i52.tinypic.com/344t6a8.jpg)
This is a silicone I put into the holes of a wheel to prevent rust. 4410 (http://i56.tinypic.com/6pyz46.jpg)
4411 (http://i51.tinypic.com/14lhjz7.jpg)
This is the result and I assure you the wheelarches is grabbed very strong and that the moves superiorni.
I emphasize again that these screws are not going to be the final this has been provisional.
As soon as you trim and you get a picture.
Greetings.

[Neil]

My set arrived safely and very well wrapped up.
The fit on the car is great.
No photos yet as they will be fixed in place towards the end of the build, just before painting.
I have a set of BBS style wheels and the arches will make the car look amazing when done.
I know that Group 4 arches are available, but they are too extreme for my taste, these Group 3 are very subtle.
Getting rally type items for the Beta is so difficult to find so I'm chuffed to get these!

[kurtys]

Hi Neil.
I am happy that wheelarches have arrived safely.
I am now ready to finish painting mine placement.
I will put photos of the process in the forum.
I just sent the letter to your friend wheelarches.
A greeting.

[828bc]

Hello Kurtys,
finally I got to see the pictures, after my account here was activated.
The Group 3 wheelarches look great, and like Neil I think the Group 4 look too extreme.
So what do I say, I would like to have a complete set.
If I understood you right, they are 180 € + 35 € shipping to Germany?

Please send me your prefered method of paying,
looking forward to hearing from you,
Regards
Uli

[kurtys]

Hi Uli, welcome to the forum
I answered by mail.
I have sent the letter of payment
Greetings.
Vicente

[828bc]

Hi Vicente,
your packet already reached its destination!
Thanks a lot - very much looking forward to installing the wheelarches, yet some bodywork has to be done first to my car -it is currently at a specialist store for welding.
But getting those wheelarches has certainly brought me much further in finishing my car.
Best greetings,
Uli

[kurtys]

I am happy to receive good news.
I hope to see photos of your car over.
My car is almost done, I am painting the wheelarches.
Greetings

[kurtys]

Well gentlemen, it already have it. I have already painted as a rubber molding on top, resting on the bodywork, not to scratch the paint. It is about 5mm wide.
4664
4665

After that, there was only positioned and secured with bolts.
The bottom line is this:


4666

4667


This week we'll post some pictures from various angles and close for you to see how jobs are.
Regards.

[kurtys]

More pictures of beta

4674

4670
4671
4672
4673

[HF Stinger]

Kurtys that car is beautiful!

I received my flares quickly and now I just have to find me a car to put them on.

[Grundo Farb]

Well gentlemen, it already have it. I have already painted as a rubber molding on top, resting on the bodywork, not to scratch the paint. It is about 5mm wide.
4664
4665

After that, there was only positioned and secured with bolts.
The bottom line is this:


4666

4667


This week we'll post some pictures from various angles and close for you to see how jobs are.
Regards.

Hello kurtys, can you give me more detail on the rubber moulding please for the top of the flares? It is hard to see on the photo.

thanks,
Adam

[fulviaHF]

Are you able to safely send them to Australia?

Please advise the shipping cost and details as well as you best price to me via my email address: d2e.commstream@gmail.com

Just curious - was it theoretically possible to post these to Australia?
I ask because a while back I tried to buy some Fulvia wheel arches - but was told they were too big for post.

[Grundo Farb]

Just curious - was it theoretically possible to post these to Australia?
I ask because a while back I tried to buy some Fulvia wheel arches - but was told they were too big for post.

Well I live in NZ and they were able to be sent here. Of course you Aussies are a little bit backward with these things ;-)

Not sure of your information, I have had all sorts of things sent from the US, UK and Europe. A lot of it quite big and bulky.

[HF Stinger]

I live in the USA and mine arrived safely and quickly.

Now I just have to get a car to put them on!