Scorp. Diff. Gasket Kit

[davidb]

Differential/transaxle whatever. Anyone know of a gasket
kit source? A complete gasket kit/set would be my pre-
ference. I got too many leaks to live with even w/Vick's
thick GL-1. I hate the leaks + the oily garage floor. Thanks.

[Celovsky]

Leaks can occur from the gaskets, oil seals or drain plug. If you have trouble finding new pre-cut gaskets, it is pretty easy to cut new paper gaskets from sheet gasket paper (available at any auto parts supplier). As for oil seals, these are almost always a common stock size.... ID x OD x Thickness. Remove the old seal and the oil seal size will be molded into the seal rubber... order on-line (and let us all know size). A little teflon tape should clear-up any drian plug leaks.

Whenever I cut new paper gaskets I usually cut a spare or two. The hardest part is getting a decent pattern. (hollow punches work very well to produce the bolt holes.)

Andrew C.

[Ed P]

David,

I used to make these up in the 1980's and 1990's by ordering all the individual gaskets & seals from Lancia and then putting them together in one kit. I might have a few of the original gaskets sitting on a box somewhere, but almost all of the parts are now NLA. If you'd like a list of part numbers just send me an email and I will look it up for you.

Best Wishes,

Ed
pizza-store@hotmail.com
www.ItalianCarManuals.com

[davidb]

Thanks Gents. I shoulda added I'd need shaft seals too.
I shoulda checked TMH before posting. Rodders has
everything. I might go that route.