In-head thermostat install

[prorallycodriver]

I wanted to make working on my Scorpion a bit easier by ditching some of the coolant hoses and relocating them further from the engine to give better access to the water pump and timing belt. So I installed an in-head thermostat and steel braided hoses accordingly. Now (old pics) looks like this:


http://memimage.cardomain.com/member_images/11/web/803000-803999/803556_108_full.jpg

http://memimage.cardomain.com/member_images/11/web/803000-803999/803556_106_full.jpg


The large hose from the water pump to the radiator now runs behind the strut tower instead of jammed into the timing belt and water pump acess area.