Koni shocks and fenders

[Renier Nelspruit RSA]

Hi all , can anybody tell me whats the part nr for the front and rear koni shocks on beta 2000 coupe (1979 mod ) ? Then im building a beta coupe rally car and would like to know how or where can i get those plastic bolt on wheel arch flares that they used in the older days ?

[Jim Keller]

Not sure of the part number, but all year Betas use the same Koni strut, not available new unless you happen apon a set that's been stashed for years. Best to post in the Beta section and classifieds that you want a set of Koni's, or watch eBay, buy a used set, then send them off to Koni NA in Kentucky. Koni NA charges $125 roughly to rebuild them and they give you a life time warranty on them when they rebuild them. you can also have them modified to be adjustable without removing them from the car, that does cost an extra of corse as they swap out the original solid shafts with the new style hollow ones with adjuster knob on top. Thats how I had the last ones done.

Plastic flares are available at about any speed shop, Summit Racing, Jegs, etc....why not just roll the fender lips out? that's how they did it way back when and how I plan to do my Coupe when I "Git-Round-Tu-It"! LOL

[Andrew S]

http://www.abarth-gmr.be

This guy makes glassfibre arches/kits etc.

Andrew.

[Timo04]

Hi all , can anybody tell me whats the part nr for the front and rear koni shocks on beta 2000 coupe (1979 mod ) ?

Have you tried contacting KONI directly? Try searching on the official KONI web site for your most local KONI repair outlet. Here in the USA, KONI NA located in the state of KY is an invaluable resource for parts and part numbers. HTH.

http://www.koni-na.com/

All the best,