lanciatomcat
2nd August 2008, 02:47 AM
I decided to change the existing air filtering system for an ITG system. My latest uploads to my S2 Spyder gallery show this.
Other work involved in this change was blocking off the vacuum pipe and handling the crankcase breather pipe. I decided to fit an oil catch tank and breather system. I forgot about checking on the chosen point with the wheel in place but luckily it is OK just!!:red face:
I also am replacing all the existing fuel lines and adding a Filter King into the system. A previous owner had changed from mechanical to electric pump and I plan to add an inline fuse into the circuit.
Other work involved in this change was blocking off the vacuum pipe and handling the crankcase breather pipe. I decided to fit an oil catch tank and breather system. I forgot about checking on the chosen point with the wheel in place but luckily it is OK just!!:red face:
I also am replacing all the existing fuel lines and adding a Filter King into the system. A previous owner had changed from mechanical to electric pump and I plan to add an inline fuse into the circuit.