PDA

View Full Version : Veglia Borletti rev counter


Brian Wood
19th March 2008, 10:06 AM
Not strictly a Fulvia item but I am going to fit a works style dash to my project Fulvia. I have a number of Veglia guages and have a problem with the rev counter wiring. 3 tags on the back all unmarked - which one is for what - coil/supply/earth - but in what order.....anyone able to help?

radioal
15th April 2008, 05:35 PM
If your Veglia tach is similar to the Fiat Spider Veglias (and i suspect it is since i've seen the same guts in several different style housings) then if you hold the unit face down and right side up, the terminals will be in a crescent to the left of center.
Top
Ground------------>0

Coil-------------->0

Battery------------>0
Bottom

Hope this helps,

Al

Brian Wood
18th April 2008, 12:40 PM
I have 3 small terminals in a crescent with very feint markings - looking from the rear the left one could be a + then a - and then a 1. ....?

radioal
19th April 2008, 06:47 AM
I looked a little more closely at mine. The hot or battery lead is marked + and GN. The coil lead is marked 1 and M. The Ground is marked with a ground symbol and BN. The letters are the wire colors used by Fiat (Bianco-Nero=ground, Marrone=coil, Giallo-Nero=hot). It looks like + is for +12 Volts, 1 is coil and - is Ground.

Al

Brian Wood
24th April 2008, 12:31 PM
Sorted - Thanks a lot !!