PDA

View Full Version : Newbie question - wheel aligment

Montrala
7th September 2002, 05:50 PM
Hi!

What is reccomended (by most people :wink: ) wheels aligment for 16V? I have Eibach FE springs, and 8V torque splitter (as this is catlitic converter version with 16V body).

Thanks in advance! :D
Bazza
9th September 2002, 01:34 AM
Hi!

What is reccomended (by most people :wink: ) wheels aligment for 16V? I have Eibach FE springs, and 8V torque splitter (as this is catlitic converter version with 16V body).

Thanks in advance! :D

Toe the front straight ahead and the rears toe in 1mm. each side - that what we do :wink:
Montrala
9th September 2002, 02:13 AM
Toe the front straight ahead and the rears toe in 1mm. each side - that what we do :wink:

Great! Thas's what I set using my intuition :lol: I use same for my Lancer Evo V :D

But what about camber figures?
Bazza
10th September 2002, 05:17 AM
But what about camber figures?

Depends on how you want to drive but a good compromise is 2.5° negative on the front and 1.5° negative on the rear.
Montrala
11th September 2002, 02:50 AM
Depends on how you want to drive but a good compromise is 2.5° negative on the front and 1.5° negative on the rear.

Thanks! I have 3, 2.5 front now and 1.5, 1 rear now. I'll work it out (struts are not bent).