Fulvia Wheel Interchange

[bobbyc]

What other make wheels will fit Fulvia Series 2? Older Fiat and Alfa wheels look close but I wanted to check with the resident body of experts. Thanks!

[omicron]

The Fulvia bolt pattern is a much larger PCD than the later 98mm PCD used by Alfa / Fiat / Lancia etc.,

The fitment is 4 x 130mm pcd with offset between 25mm and 50mm depending on the wheel (there were a variety used on Fulvias).

The 4x130pcd is common to some ancient Skodas and also old VW Beetles (VW Bug's)

Finding a wheel that blends in with the classicly understated chic of the Fulvia is quite difficult, unless you want wheels for competition use.

Andrew

[Otto-valvole-per-tutte]

You sometimes can find the beautifully 6Jx14 Campagnolo wheels on Beetle Cabrios.

8)

[Peter Cripps]

The 4x130pcd is common to some ancient Skodas and also old VW Beetles (VW Bug's)



Right. It was also used by the Porsche 914/916.

Peter

[Brian Wood]

I am running some Skoda Estelle/Rapid130 wheels for competition use I got for free...! They are available in 5J [Meteor]and 5.5J [Jupiter] with a PCD of 130 but they do not locate properly on the hub centre. Also can foul the brake calipers. I had some spacer/locators made up by a local engineering company but these are not available commercialy. Painted white they look OK though. See pic Viva lancia! Nov/Dec 2005
Brian